Plascon Prime-All Plaster & Gypsum Primer 5L
R399.00 Incl VAT.
Dermato Clean Hyaluron Cleansing Gel 200ml
R18.80 Original price was: R18.80.R13.15Current price is: R13.15. Incl VAT.
Plascon Prime-All Plaster & Gypsum Primer 1L
R99.00 Incl VAT.
4799952 In Stock.
Description
Description
Plascon Prime-All Gypsum & Plaster Primer (UC 10) is a water-based primer for masonry and gypsum surfaces.
Specifications
Specifications
| Weight | 1.32 kg |
|---|---|
| Dimensions | 12.1 × 12.1 × 12.4 cm |
Product Details
Product Details
Brand: Plascon
Additional Information
Additional Information
Appearance : Matt
Colours : White
Viscosity at 23 °C : 85 – 95 KU (Typical)
Typical spreading rate : 8 – 10 m²/L per coat @ 45 μm DFT. This serves as a guide only.
Practical spreading rate : The practical spreading rate will vary depending on the profile of the substrate, as well as the application technique and tools used.
Uses
Uses
For use as a primer on substrates such as interior and exterior new cement plaster, gypsum, fibre-cement, concrete, brickwork and composite boards.
Features
Features
- Interior and exterior use
- Efflorescence resistance
- Alkaline resistance
- Excellent adhesion
- Low Spatter
- Low VOC
- Can be overcoated with water-based and solvent-based topcoats
Application
Application
- Mixing : Stir thoroughly with a flat paddle until homogeneous and
occasionally during use. - Substrate : Thoroughly prepared concrete, plaster, brickwork and various
building boards. - Method : Brush, roller or airless spray
- Thinning : Ready for use by brush or roller application.
- Cleaning : Water
Application environment : Surface Temperature Min*: 10 °C Max: 40 °C
Ambient Temperature Min*: 10 °C Max: 40 °C
Relative Humidity Min*: 10% Max: 85%
*or 2 °C min. above dew point
Drying Time : Touch dry: 1 hr @ 23°C
Overcoating: 4 – 6 hr @ 23°C
Maximum overcoating time: 2 days @ 23°C
